Multiple_protocol_Converter
Data Station Plus is the single-device solution for protocol conversion. The DSP bridges the communication gap between disparate serial.
Product Availability: Against PO
Country Of Origin : Taiwan
FEATURES
- Protocol Conversion Feature Converts up to 15 Protocols Simultaneously
- Extensive Built-in Driver List Allows Easy Data Mapping to PLCs, PCs, and SCADA Systems
- 2 RS-232 Serial Ports
- 1 RS-422/485 Serial Port
- 10/100 Base-TX Ethernet Connection Can Connect To Multiple Devices Via Four Protocols Simultaneously
- Independent Serial Ports Provide Virtually Unlimited Integration Methods
DOWNLOAD
SPECIFICATIONS
| POWER | 24 VDC ± 10% 200 mA min., without expansion card 1 Amp maximum with expansion card fitted |
| USB/PG Port | Adheres to USB specification 1.1. Device only using Type B Connection. |
| Serial Ports | Format and Baud Rates for each port are individually software programmable up to 115,200 baud. RS232/PG Port: RS232 port via RJ12 COMMS Ports: RS422/485 port via RJ45, and RS232 port via RJ12 DH485 TXEN: Transmit enable; open collector, VOH = 15 VDC, VOL = 0.5 V @ 25 mA max. |
| Ethernet Port | 10 BASE-T / 100 BASE-TX RJ45 jack is wired as a NIC (Network Interface Card). |
| LEDs | STS – Status LED indicates condition of Data Station. TX/RX – Transmit/Receive LEDs show serial activity. Ethernet – Link and activity LEDs. CF – CompactFlash LED indicates card status and read/write activity |
| MEMORY | On-board User Memory: 4 Mbytes of non-volatile Flash memory. On-board SDRAM: 2 Mbytes Memory Card: CompactFlash Type II slot for Type I and Type II cards. Used for optional database storage only |
| REAL-TIME CLOCK | Typical accuracy is less than one minute per month drift. Battery: Lithium Coin Cell. Typical lifetime of 10 years at 25 ºC. A “Battery Low” system variable is available so that the programmer can choose specific action(s) to occur when the battery voltage drops below its nominal voltage. |
| ENVIRONMENTAL CONDITIONS | Operating Temperature Range: DSPLE000: 0 to 50 °C DSPLE001: -20 to 70 °C Storage Temperature Range: -30 to 70 °C Operating and Storage Humidity: 80% max relative humidity, non-condensing, from 0 to 50 °C Vibration to IEC 68-2-6: Operational 5 to 150 Hz, 2 g. Shock to IEC 68-2-27: Operational 30 g Altitude: Up to 2000 meters |
| CONSTRUCTION | Case body is burgundy high impact plastic and stainless steel. For indoor use only. Installation Category II, Pollution Degree 2 |
| POWER CONNECTION | Removable wire clamp screw terminal block. Wire Gage Capacity: 24 AWG to 12 AWG Torque: 4.45 to 5.34 in/lb (0.5 to 0.6 N-m) |
| MOUNTING | Snaps onto standard DIN style top hat (T) profile mounting rails according to EN50022 -35 x 7.5 and -35 x 15. |
| CERTIFICATIONS AND COMPLIANCES | CE Approved EN 61326-1 Immunity to Industrial Locations Emission CISPR 11 Class A Safety requirements for electrical equipment for measurement, control, and laboratory use: EN 61010-1: General Requirements EN 61010-2-201: Particular Requirements for Control Equipment RoHS Compliant UL Listed: File #E302106 UL Hazardous: File #E317425 ABS Certificate #09-HS426719-B-4-PDA Refer to EMC Installation Guidelines section of the bulletin for additional Information. |
| WEIGHT | 15.1 oz (428 g) |
