E2-16DI24-D EtherTRAK-2 I/O Module-16 24V Digital Inputs

E2-16DI24-D

EtherTrak-2 I/O Module-16  24V Digital Inputs

Product availability : AGAINST PO.

Country Of Origin : Taiwan

FEATURES

  • Flexible mix of I/O channels support all instrumentation needs
  • Real-Time Ring™ for fast redundancy
  • Dual independent Ethernet ports enable flexible networking
  • Built-in security proactively blocks unwanted access
  • Extensive health diagnostics and reporting reduce downtime
  • Standard Modbus protocols provide universal compatibility
  • Rugged design supports extreme temperatures and hazardous locations

DOWNLOAD

Power Input • Power supply voltage: 10-30 VDC

• Input current requirement: 100 mA @ 24 VDC typical with no loads

• PoE power (EB modules only): 10 watts at 60°C for user loads

• De-rate: up to 5 watts at 75°C
Serial Ports • RS-485 port: screw terminals (485+, 485-, GND; 2-wire halfduplex, not isolated) • RS-485 networking: up to 32 (full load) stations • RS-485 distance: up to 0.5 miles (baud-rate dependent) • Baud rates: from 300 to 57,600 baud • Protocols: master and slave; Sixnet and Modbus RTU/ASCII • Diagnostic LEDs: transmit (TD) and receive (RD)
Discrete Input Channel • Voltage range: 10–30 VDC or 60–140 VAC • Input isolation: 150 volts (16 channel modules only) • Input resistance: 10 Kohms • Slow response (software configurable): 25 mS (20 Hz. maximum counting rate) • Fastest response (software configurable): 1 mS (400 Hz. maximum counting rate) • Special fast counting rate: up to 50 KHz on channels 1 and 2 • Count up: pulse timing and pulse rate 16 or 32-bit reporting • Refer to user manual for additional specifications
Certifications & Compliance • Electrical safety : UL 508, CSA C22.2/142; EN61010-1; CE

• EMI emissions: FCC part 15, ICES-003, Class A; EN55022; IEC6100-6-4; CE

• EMC immunity : IEC61000-6-2 (EN61000-4-2,3,4, 5, 6, 8); CE

• Hazardous locations: Class 1, Div 2, Groups A, B, C, D; ISA12.12.01; CSA C22.2/213; ATEX (Zone 2) IEC60079-0,-15

• Marine and offshore: tested and/or verified to meet various standards such as ABS, DNV No. 2.4, and Lloyds
ENVIRONMENTAL • Operating temperature: -40 to 75°C (-40 to 85°C storage)

• Humidity: 5 to 95% RH (non-condensing; optional conformal coating)

• Flammability: UL 94V-0 materials

• Vibration: IEC60068-2-6

• Shock: IEC60068-2-27
MECHANICAL • Mounting: DIN rail (EN50022), direct to panel or flat panel

• Packaging: impact resistant Lexan® polycarbonate

• Dimensions (module and base): 5.5”L x 3.5”W x 5.1”H (14cm x 8.9cm x 13cm)