E3-MIX20884-1
E3 I/O Module 32-Mixed Input/Outputs
Product availability : AGAINST PO.
FEATURES
- Wide Variety of I/O Configurations
- 17 models with various discrete, analog and temperature I/O
- Powerful Networking Capabilities
- Built-in two port Ethernet switch for daisy chaining, redundancy, or pass-through
- Modbus protocol support for industrial monitoring and communications
- Built-in Security for Proactively Blocking Unwanted Access
- RS-485 Port for Connecting Serial Devices to Ethernet Network
- Industrial Design Supporting Deployment in Extreme Environments
- Hardened metal enclosure with both DIN-rail and panel mount options •
- Wide -40° to 75°C operating temperature range •
- UL/cUL Class 1, Division 2 Listed
- Configured via Crimson software for easy point-and-click configuration or through built-in web interface
DOWNLOAD
SPECIFICATIONS
| Power Input | Input Voltage: 10-30 VDC (12-24 Nominal)
Steady Input Current: Maximum: 355mA @ 24VDC no loads Average: 190mA @ 24VDC no loads Minimum: 150mA @ 24VDC no loads Max Inrush: 5 A /100 us @ 24 VDC BTU/HR: 8 (typical) |
| Switch Properties | Operation: Monitored IEEE Compliance: 802.3, 802.3u, 802.3ab, 802.3x 802.1d/D/w, 802.1p, 802.1Q, 802.1x Protocols: TCP/IP, ARP, UDP, ICMP, DHCP, HTTP, Modbus TCP, Modbus UDP (slave or master), Sixnet TCP, Sixnet UDP (slave or master) Latency (typical): 5 us @ 100 Mbps Switching Method: Store-and-Forward Networks: 1 or 2 independent with unique MAC and IP addresses Real-Time Ring: 30 ms + 5ms per hop MDIX Auto Sensing Cable Auto Sensing Speed and Flow Control |
| Input Capabilities | DISCRETE INPUTS*
Voltage Range: 10-30 VDC or 60-140 VAC Input Resolution: 150 volts (16 channel modules only) Input Resistance: 10 Kohms Slow Response: 25 ms (20 Hz max count rate) Fast Response: 1 ms (400 Hz max count rate) Special Fast Counting: Up to 50 KHz (channel 1 & 2) Count Up: Pulse timing and pulse rate 16 or 32-bit reporting ANALOG INPUTS* Input Range: 4-20 mA, 0-10 VDC, RTD, thermocouple and 250 mV Analog/Discrete Resolution: 16 bits (0.003%); 10 bits (1 ms fast option) Input Impedance (Resistance): 100 ohms or 200 Kohms Fuses: Self-resetting short circuit protection (4-20 mA inputs) DMRR (Differential Mode): 66 db at 50/60 Hz Update Time: 880 ms to 1 ms (configurable) Temperature Accuracy: +/-0.5°C uncalibrated (typical) RTD Type: 100 Ohm platinum RTD Alpha: 0.00385 or 0.00392 RTD Connections: 2 or 3-wire RTD Input Range: -200° to 850°C |
| Outputs | DISCRETE OUTPUTS*
Output Voltage Range: 10-30 VDC or VDC/AC Maximum Output Power: Up to .6 A per channel Short Circuit Protection: Self-reset fuses Input Isolation: 150 V (16 channel modules only) Channel Scan Rate: 1 ms ANALOG OUTPUTS* Analog Output Range: 4-20 mA Analog/Discrete Resolution: 16 bits (less than 1 uA) Full Scale Accuracy: +/-0.02% (@20°C) Span and Offset Temperature: +/- 50 ppm per °C Load Resistance: 0-750 Ohms @ 24 VDC Current Limiting Short Circuit Protection |
| Connectors | Ethernet Ports: Two (2) 10/100Base-T(X) RJ45 ports Serial Port: One (1) RS-485 screw block (485+, 485-, GND; 2-wire half-duplex, non-isolated) RS-485 Networking: Up to 32 (full load) stations RS-485 Distance: Up to 0.5 miles (baud-rate dependent) Baud Rates: 300 to 57,600 baud Protocols: Master and slave; Sixnet and Modbus RTU/ASCII |
| Certifications & Compliance | Hazardous Locations: ANSI/ISA 12.12.01-2013 Edition (Class I, Div. 2, Groups A, B, C, and D), CSA C22.2/213;
Marine/Offshore: Rated per ABS, DNV and Lloyds Electrical Safety: UL 508, CSA C22.2/142, EN/IEC61010-1, CE EMI Emissions: FCC part 15, ICES-003, Class A, EN-55022; EN6100-6-4, CE EMC Immunity: EN61000-6-2, CE (EN61000-4-2,3,4,5,6,8); CE Flammability: UL 94V-0 materials |
| ENVIRONMENTAL | Operating Temperature Range: -40° to +75°C
Storage Temperature: -40° to 85°C Operating Humidity: 10% to 95% (Non Condensing) Shock: IEC60068-2-6 Vibration: IEC60068-2-27 |
| MECHANICAL | Case Dimensions: Height: 5.30” (134.6 mm) Width: 5.60” (142.2 mm) Depth: 2.85” (72.4 mm)
Weight: 2.5 lb.s (1.3 kg) Mount: DIN Rail 35 mm MTBF: >1M Hours** |
