I-7530
Intelligent RS-232 to CAN Converter
Product availability : Against PO
Country Of Origin: Taiwan
FEATURES
- Compatible with CAN specification 2.0A and B
- Fully compatible with ISO 11898-2 standard
- Support various baud rate from 10K bps to 1M bps
- Jumper for 120 Ω terminator resistor
- Software configurable CAN and RS-232 communication parameters
- 1000 frames in CAN received buffer, 900 frames in RS-232 received buffer
- Watchdog inside
- Support transparent communication mode
- Full-duplex communication mode of RS-232 devices is not supported
- Serial COM command error response selection
- Utility tool for transmitting / receiving CAN messages
DOWNLOAD
SPECIFICATIONS
| MODEL | I-7530 | |
|---|---|---|
| CAN Interface | Controller Transceiver Channel number Connector Baud Rate (bps) Transmission Distance (m) Isolation Terminator Resistor Specification Receive Buffer |
Microprocessor inside with 20 MHz NXP 82C250 or TJA1042 (only for I-7530T) 1 9-pin male D-Sub (CAN_L, CAN_H, N/A for others) 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 Mbps Depend on baud rate (for example, max. 1000 m at 50 kbps ) 3000 V DC for DC-to-DC, 2500 Vrms for photo-couple Selectable 120 Ω terminator resistor by jumper ISO-11898-2, CAN 2.0A and CAN 2.0B 1000 data frames |
| UART Interface | COM COM Connector Baud Rate (bps) Data bit Stop bit Parity Receive Buffer |
RS-232 9-pin female D-Sub (TxD, RxD, GND, N/A for others ) 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps 5, 6, 7, 8 1, 2 None, Even, Odd 900 data frames |
| LED | Round LED |
ON LED: Power and Data Flow; ERR LED: Error
|
| Power | Protection | Power reverse polarity protection, Over-voltage brown-out protection |
| Power Consumption | 1W | |
| Mechanical | Dimensions | 72mm x 118mm x 33mm (W x L x H) |
| Installation | DIN-Rail | |
| Environment | Operating Temperature | -25 °C ~ +75 °C |
| Storage Temperature | -30 ~ 80 °C | |
| Humidity | 10 ~ 90% RH, non-condensing |
