NT24K-16M12
16M12 IP67 Gigabit Managed Switch
Product availability : Against PO.
Country Of Origin : Taiwan
FEATURES
- 16 10/100/1000BaseTX Copper M12 X-Code Ports
- -40°C to 85°C Operating temperature
- >2M hours MTBF
- IP67 Rated enclosure
- Dustproof
- Protection against low/high pressure water jets
- Safe for temporary immersion in water
- 10-49 VDC redundant power inputs
- ESD and surge protection on all ports
- Auto Sensing 10/100/1000BaseTX, Duplex, and MDIX
- Store-and-forward Technology
- 16k MAC Addresses
- USB Configuration Port
- Full wire speed communications
- Auto sensing speed and flow control
- Backup and restore via recovery card or XML configuration file
- Fully Managed Features:
- Jumbo Frame Support
- SNMP v1, v2, v3
- SSH/SSL/HTTPS
- Web Browser Management
- Detailed Ring Map and Fault Location Charting
- 802.1d, 802.1w, 802.1D RSTP
- Port Trunking and Mirroring
- 802.1Q tag VLAN and Port VLAN
- 802.1x with RADIUS Remote Server Authentication
- 802.1p QoS, Port QoS and DSCP
- DHCP Client
- Event Log/Syslog
- SNTP (Simple Network Time Protocol)
- Multi-Member N-Ring™ Technology with ~30ms Healing
- N-Link™ Redundant Ring Technology
- N-View™ Monitoring and Firmware Management Technology
- EtherNet/IP™ CIP™ Messaging
- 802.1 AB -2005 LLDP (Link Layer Discovery Protocol)
- Web configuration
- IGMP Auto Configuration
DOWNLOAD
SPECIFICATIONS
| NT24K-16M12 | |
| Physical Ports : |
|
| 10BaseT: | >Cat3 Cable |
| 100BaseTX: | >Cat5 Cable |
| 1000BaseT: | >Cat5e Cable |
| Input Voltage: | 10-49 VDC |
| Input Current: | 0.70 A@24Vdc |
| Number of MAC Addresses: | 16000 |
| Latency Typical: | 1.6 μs |
| MTBF | >2 Million Hours |
| Dimensions (W x D X H): | 32.61 x 8.10 x 14.99 cm ( 12.84 x 3.19 x 5.90 inches) |
| Operating/Storage Temperature: | -40° ~ 85° C |
| Operating Humidity: | 10% to 95% (non condensing) |
| Emissions: | FCC 47 CFR Part 15 |
| Operating Altitude: | 0 to 10,000 ft. |
| Vibration: | 50g, 5-200Hz, Triaxial (bulkhead mounted) |
| Safety: | ANSI/ISA-12.12 .01 -2015 – Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations, Groups A, B, C and D Hazardous Locations UL 61010-1 Edition 3 – Revision Date 2016/04/29 CAN/CSA C22.2 No. 213-16 – Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations, Groups A, B, C and D Hazardous Locations CSA C22.2 NO. 61010-1-12 |
