VDX-6324RD
Vortex86DX Half-Size CPU Module with 256MB DDR2
Product availability: Against PO
Country Of Origin : Taiwan
FEATURES
- DM&P SoC Vortex86DX – 800MHz
- 4S/4U/VGA/LCD/LAN/LPT/PWM/16GPIO/CF/IDE
- 256MB / 512MB DDR2 onboard
- Operation Temperature: -20 ~ +70°C / -40 ~ +85°C (Optional)
- Onboard 4MB SPI Flash
- PC/104 Connector Onboard
- Optional: Onboard Flash Disk / CF socket / PCI-104 Connector / Audio
DOWNLOAD
SPECIFICATIONS
| SoC |
DM&P SoC CPU Vortex86DX- 800MHz
Real Time Clock with Lithium Battery Backup
|
| Cache | L1:16K I-Cache, 16K D-Cache, L2 Cache 128 KB |
| Bus |
PC/104 standard compliant PCI-104 (Optional)
|
| BIOS |
AMI BIOS
|
| System Memory | 256/512MB DDR2 Onboard |
| Watchdog Timer |
Software programmable from 30.5μ sec.to 512 sec.
x 2 sets (Watchdog 1 fully compatible with M6117D)
|
| VGA |
XGI Volari Z9s Chipset
VGA and TFT Flat Panel Interface Support
Onboard 32MB VGA Memory, support resolution up to 1280
x 1024, 16M colors
|
| LAN | Integrated 10/100Mbps Ethernet |
| Audio | CM119 USB Audio Controller (Optional) |
| Flash Disk Support |
Onboard 4MB SPI Flash Disk
MSTI EmbedDisk Module (16MB and above)
Compact Flash Type I/II
44-pin IDE to Micro SD (Optional)
|
| PWM | 16~24 Channels |
| SRAM support | 512KB (Optional) |
| I/O Interface |
Enhanced IDE port (UltraDMA-100/66/33) x1
RS-232 port x3
RS-232/422/485 port x1
USB port (Ver2.0) x4
Parallel port x1
16-bit GPIO port x1
10/100Mbps Ethernet port x1
|
| Connectors |
2.0mm 44-pin box header for IDE x1
2.0mm 44-pin box header for LCD x1
2.54mm 26-pin box header for Printer x1
2.54mm 20-pin box header for 16-bit GPIO x1
2.54mm 10-pin box header for RS-232 x3
2.54mm 10-pin box header for USB x2
2.54mm 4-pin header for -5V, -12V, +12V, GND x1
2.54mm 3-pin header for RS-485 x1
2.54mm 2-pin header for Reset x1
2.54mm 7-pin header for Redundancy Signal x1 (Optional)
2.54mm 2-pin header for System-Fail-SW x1 (Optional)
1.25mm 6-pin wafer for JTAG x1
1.25mm 4-pin wafer for Line-out/MIC-in x2 (Optional)
4-pin male power connector x1
External 15-pin D-Sub female connector for VGA x1
External 9-pin D-Sub male connector for RS-232 x1
External RJ-45 connector for Ethernet x1
External Mini DIN connector for Keyboard/Mouse x1
Type I/II Compact Flash Slot x1
|
| Power Requirement | Single Voltage +5V @ 700mA |
|
Weight
Board Size
|
180g |
| Board Size | 184 x 122mm (7.24 x 4.80 inches) |
|
Operating
Temperature
|
-20 °C ~ +70 °C
-40 °C ~ +85 °C (Optional)
|
